This Storm Trooper Blaster conversion kit allows you to retrofit a Hasbro Storm Trooper Blaster toy gun with a HOT 7 Watt blue laser and a 5mW green targeting laser. Fully illustrated manual (PDF) with all parts required to produce a working laser gun. You provide the Storm Trooper Blaster toy for conversion. This kit requires minimal soldering and is considered medium skill. The sound effects are synchronized with the laser blasts. It uses the standard AA batteries in the handle for the sound effects circuit and green laser, and a separate 7.4V li-ion internal battery for the blue laser. Includes a charge port, charger and separate enable switch for the blue laser. THIS IS NOT A TOY! YOUR END PRODUCT WILL BE A REAL LASER GUN!
Recommended Tools: 3D printer, laser safety goggles, multimeter, Dremel tool, hot glue gun, soldering iron, solder, tip cleaner, tip tinner, solder smoke absorber fan, wire, precision part/wire grabber, wire strippers, precision screwdriver set, wire cutters, hole saw, JST-SM connector kit, power drill, step drill bits
WARNING: The targeting laser module used in this kit is classified by the CDRH as a Class IIIA laser (< 5mW output). The hot laser module referred to in this kit is a Class IV laser (> 500mW output). For both modules, you must never stare into the beam or point at the eyes of people or animals. Direct or reflected exposure to the eye could result in permanent damage to vision. You should always wear approved protective laser eyewear when operating this device. This kit is not sold to minors. Users should not allow children to fire this laser gun unsupervised. Brightbeam Solutions is not responsible for damage inflicted or sustained by any operation of this kit by any person. This laser gun should not be operated in public, else you would be in violation of FDA regulations and could be fined or sent to prison. If you point the lasers at an aircraft you could go to prison. SO DON’T BE AN IDIOT! You’ve been warned.
